BOND base coat gel: bonder + basecoat all in one. 

Our BOND Base Gels are specifically developed to combat adhesion problems and are able to cope with the biggest and most stressful daily studio routines.

Perfect for thin and brittle nails thanks to the hard formulation. As the base works perfectly with the natural nail, there's no need to worry about mechanical damage.

Bond Base coat gel Special Features:

• Thin consistency
• Super hard texture - after curing in a lamp, the Bond gel develops strong like stone. 
• No chipping and no lifting from nail plate. 
• Durability
• Transparent

All FabNails gels are made in UK.

APPLICATION:

Prepare the nail as usual and remove the cuticle. You can use use our Nail Prep Dehydrator and our Acid less Primer to degrease the nails and prepare for the upcoming gel. (But you can also apply Bond Base Coat Gel straight to the natural nail plate without any dehydrator, primer or air bonder.) Let both liquids dry in the air for about 20 seconds, then you can apply a very thin layer with the Bond Base coat gel. Cure in UV/LED Lamp. After, use more gel and model a C-curve and the stress point. Let the gel dry for 60 sec in the UV/LED lamp.

TIP: Make sure that your lamp always has at least 48 watts and a maximum of 60 watts (We recommend a 48 watt lamp because they do not work with low heat mode. Using a lamp that does not automatically operate in low heat mode ensures that extremely highly pigmented gels are completely cured).

Continue by leaving the sweat layer, but either paint a Fabnails gel Polish colour on it, or leave the nails as they are. The last step is to seal the nail with a sealing gel of your choice. We recommend our bestseller X Shine to our customers!

 Keep away from children and fire. Avoid contact with eyes. In case of contact, rinse eyes with cold water. Consult your doctor.

For professional use.